Reply To: Vulcan owners opinions?
I tried adjusting the spring tension but it’s having enough to index that last pellet.
There is 3 holes in the magazine for fitting the spring, guess they select the best based on the spring when building them.
My magazine was also slightly lazy on the last cycle and if you played with it out of the gun with no pellets you could get it to stick occasionally. That may explain why I had the odd occasion where I knew the gun wasn’t empty but the cycling would jam (hitting the edge of the mag centre)
To get round this I lubed all the contact points of the mag parts and even where the spring runs to save any sticking. You can then set the centre screw to enable free movement with no play.