Reply To: Huben K1 Review And Insight Into Accuracy Problems
Forums › PCP Airguns › Huben K1 Review And Insight Into Accuracy Problems › Reply To: Huben K1 Review And Insight Into Accuracy Problems
If someone is willing to send it to me, I would be happy to try it out
Generally these barrels have a little bigger diameter and therefore need a bigger slug that will not fit in the magazine. Also 1-8″ twist will significantly reduce velocity and is also not needed for such short projectiles. Ant the last part: I assume you has in mind to use copper plated bullets that will have too big friction… Remember: airguns have limited pressures.
Just yesterday I wanted to test some 120 grain bullets in my wolverine 303 with 7,65 barrel. It is regulated to 150 bar (I get about over 100 ft-lbs with jsb pellets) and the bullet got stuck in the middle od the barrel