Reply To: Cricket corkscrewing

Forums PCP Airguns Cricket corkscrewing Reply To: Cricket corkscrewing



FastEddieI had some spiraling issues with my fx wildcat. First it was slightly clipping the air stripper and endcap. I drilled it out a little to fix that. What I found next was the pellet probe was seating the pellets a hair too deep and one side of the skirt became deformed enough to cause a little spiral or wobble. I adjusted that and it’s been perfect ever since. Load a pellet and then push it back out the breech and inspect the skirt.
Load one by hand also to eliminate the magazine. I used a long wooden dowel from Home Depot. Good luck

How far deep does the pellet seat now?