I think I'm going to order this gun, just wanted to know if anyone can give any reviews on it
Snowpeak Does anyone here have this gun from airgun archery fun
- Thread starter judahjohn
- Start date
It’s an almost same as a Diana bandit black.
I have a bandit that I added a stock to it, super light. Shoots hard in .177. Good to about 25 yds but difficult offhand as it’s so light and short.
Diana Bandit Black PCP Air Pistol | Pyramyd AIR
We've got a great price on the Diana Bandit Black PCP Air Pistol. Get a great price and expert advice at Pyramyd for your next outdoor adventure!
www.pyramydair.com
I have a bandit that I added a stock to it, super light. Shoots hard in .177. Good to about 25 yds but difficult offhand as it’s so light and short.
Last edited:
Upvote 0
It’s an almost same as a Diana bandit black.
Diana Bandit Black PCP Air Pistol | Pyramyd AIR
We've got a great price on the Diana Bandit Black PCP Air Pistol. Get a great price and expert advice at Pyramyd for your next outdoor adventure!www.pyramydair.com
I have a bandit that I added a stock to it, super light. Shoots hard in .177. Good to about 25 yds but difficult offhand as it’s so light and shori thought Diana was c02
Upvote 0
Sure, I got this from Wes some years back. It arrived shooting right at 500fps with JSB 25gr pellets. I tried 2 other pellets, and I got really poor accuracy, but the JSB pellets are crazy accurate in both .25 barrels.
I ported the valve and did some other work and got it to 750fps, but still felt it was slow. So, I fitted a cothran valve to it (for a crosman 2240). Now does 50fpe in short barrel, and 65 in 15" barrel.
Cheek riser and adjustable butt pad are from the UK and are basicaly unobtainable. (had to use a 3rd party buyer/shipper, and they all now decline these types of transactions)
I ported the valve and did some other work and got it to 750fps, but still felt it was slow. So, I fitted a cothran valve to it (for a crosman 2240). Now does 50fpe in short barrel, and 65 in 15" barrel.
Cheek riser and adjustable butt pad are from the UK and are basicaly unobtainable. (had to use a 3rd party buyer/shipper, and they all now decline these types of transactions)
Upvote 0
If ordering from US, plan on double tariff charges, Chinese and Canadian. Wes is one of the few retailers who informs of this upfront. Don't think tariff charges appear during purchase, think delivery service notifies consumers. WM
Upvote 0
Upvote 0
They are fidely at best. You have to turn the clear cover against the spring the while holding it open, turn it over and load the first pellet backwards. Then turn it back over and load the rest nose first. If you got big fingers like me it's frustrating.
Upvote 0
These are a much better option.
Just put a pellet in nose first then rotate to put in the next... rinse and repeat until full. The other nice feature is that you can top the mag off at any point. You can't do that with the OEM mags.
Just put a pellet in nose first then rotate to put in the next... rinse and repeat until full. The other nice feature is that you can top the mag off at any point. You can't do that with the OEM mags.
Upvote 0
Canadian resident ordering from Wes has no problem, your profile doesn't state location so figured I share the warning. US customers are charged a tariff ordering from Canada and a Chinese tariff for ordering a Chinese product. Combining these two tariffs significantly increases final cost, sneaky since retailer doesn't collect tariffs, delivery service does. WM
Upvote 0