RWS Airguns

Maybe i will have someone rebuild it , as i do not know anything about rebuilding , might be a better idea .
what caliber is it? are you interested in selling it?
rebuilding shouldn't be hard, as long as you can get the piston seal and a spring..
if you can source the parts I'd rebuild it for you.
Mark
 
IMG_2733.jpeg

Pleased with my Diana rifle family. Seldom used, but good to look at….
 
I picked up a 54 a few months ago and got parts from ARH. Spring, piston and breech seals. Getting parts is not a problem. Working on the 54 was not that bad either, not break barrel easy but simple enough. A spring compressor is a must as well as a custom spacer block to out at the rear of the action to protect the safety while rebuilding.
 
I picked up a 54 a few months ago and got parts from ARH. Spring, piston and breech seals. Getting parts is not a problem. Working on the 54 was not that bad either, not break barrel easy but simple enough. A spring compressor is a must as well as a custom spacer block to out at the rear of the action to protect the safety while rebuilding.
I've got a spring compressor..
now I just need to find a 54
Mark
 
  • Haha
Reactions: Gunnertrones