What did you do airgun related today.

Shipped off the Krai L 177 to a new home, sent the veyron plus 10x30 back. In the last few days I shipped out the thermal hand held, gk1 parts and rehomed a U2 compact.

Sighted in the U2 .177 600mm after cleaning it up, rebuilding the regulator, got it running 20gr .1775 Take aim slugs at 990fps, 18.5gr at 1090fps

I set up a new target thing at the range. I put a saw blade on a wire and hang a bell behind the saw blade. 3/8 hole and 5 1/2 inch blade for the 45 yard one and a bigger blade for the 100 yard target. It’s still in the works so I used tape and just took a shot. Missed just low right . The next two went through 3/8 of an inch and did not even wiggle the blade.
Airguns are amazing.

Picked up a Brum Tomahawk this week but it was missing its slimtech silencer. Wasn't much fun to cock the 13" LW barrel, so had a rummage in the shop....only had stainless in but made this little 1/2" unf mod anyway-



Does the job and looks 'ok', but will be replacing it with something more correct in the long run.....

Iowa Airgunner said:

I set up a new target thing at the range. I put a saw blade on a wire and hang a bell behind the saw blade. 3/8 hole and 5 1/2 inch blade for the 45 yard one and a bigger blade for the 100 yard target. It’s still in the works so I used tape and just took a shot. Missed just low right . The next two went through 3/8 of an inch and did not even wiggle the blade.
Airguns are amazing.

Click to expand...

Dang... just had a couple dozen mediocre circular saw blades I consigned to the garbage can (and cost me nothing to begin with)!

Today was pretty good day at the swapper. Couple weeks back bought a full, red Sheridan 500 rd. tin of 5mm pels for $20. Today, a friend of the seller bought (and resold to me) two earlier, gray/white 500 rd. tins of 5mm pels (only one tin was about 95% full) for $35.00 the pair. Then found the three pictured "spice-cans" of Crosman .22 cal. pels. One is sealed and two opened but basically full, for $10. Lastly got the Ontario US machete for $10. One never knows where your pellet rifle will take you...

Working on my auction treasures. Painted the barrel of my Crosman 114, did the first coat of TruOil on it's stock. Did the first coat of Minwax on the stock of the Benjamin 347 and while its drying I attacked the barrel and action with Gun Scrubber then gave it a nice wipe down with TriFlow. A fun day even though my favorite college football team got stomped by Texas Tech.