Spent some tedious time jeweling my bolt and custom bolt handle and getting carbon tensioner setup . Hitfires german barrel bands are so nicely made..
Diana Chaser project update
- Thread starter walther
- Start date
time, money and a lot of work, imagination is shown there
i di see a lathe and that helps with some of the work as in making the tube end 90 degrees
for those who don't have a lathe you will find pipe collars and a disc sander for a drill will do the job
nice job tinkering i enjoy myself
i di see a lathe and that helps with some of the work as in making the tube end 90 degrees
for those who don't have a lathe you will find pipe collars and a disc sander for a drill will do the job
nice job tinkering i enjoy myself
Upvote 0
Thanks, with its previous 8.2 inch barrel it shot .22 14.3 cp at 460fps and 1 inch groups at 35 yds.Hey Walther,
Beautiful Work- How does she shoot?
With the new 12 inch barrel it gained 14.2 fps per inch so about 514 fps. After B Staley debounce mod it dropped to 495fps .
have not been able to get it outside to see how it’s grouping at long distance. But at 30 feet it’s one hole.
My little unimat lathe bore is too small for 12mm barrels so I have a system using my bench belt sander a gig to hold barrel and spin the barrel counter clockwise using a hand drill. Works really well. I use the lathe for making my airstrippers , shrouds and bolt handles as well milling operations as it is convertble to mill.
Upvote 0