FX What size, who sells specific 2?

Jump to latest Follow Reply
JamesD.

JamesD.

Member
Dec 9, 2015
2,594
328
NE PA, United States
I have the barrel O-ring kit but I hate that nothing is labeled nor do I wish to see if what fits to find it didn’t.
Who can list this size for barrel TP sealing and or a full schematic kit relative to this MKIII?
One of you guys should start a O-ring/full schematic individually bagged kit business.
That’s my only gripe with Airguns. The maintenance.
IMG_8782.jpeg

Barrel Kit Only? Are you kidding me? There’s no way I can tell what goes where. That little one in the bag was stuck under the sticker. Not even sure if it belongs in there. Think I should move next to a airgun shop. The soft screws are annoying also. Looking for someone to service it completely and replace with the SS screws.
IMG_8783.jpeg
 
Last edited:
  • Like
Reactions: beerthief
JamesD. said:
I have the barrel O-ring kit but I hate that nothing is labeled nor do I wish to see if what fits to find it didn’t.
Who can list this size for barrel TP sealing and or a full schematic kit relative to this MKIII?
One of you guys should start a O-ring/full schematic individually bagged kit business.
That’s my only gripe with Airguns. The maintenance.
View attachment 590062
Click to expand...
one of the very reasons i do not have a complicated PCP.
 
  • Like
Reactions: JamesD.
Upvote 0
@JamesD.
I have used this eBay vendor very often.
For a number of different brand of guns.
With FX, for example, the O-rings are individually bagged with the FX part number and the schematic number labeled on the bag

Check his feedback and you will find my eBay username, cucucinderella, there often

Just my 2 cs x od

Edward

www.ebay.com

Fx for sale | eBay

Get the best deals for Fx at eBay.com. We have a great online selection at the lowest prices with Fast & Free shipping on many items!
www.ebay.com
 
  • Like
Reactions: JamesD. and RoosterCogburn
Upvote 0
JamesD. said:
I have the barrel O-ring kit but I hate that nothing is labeled nor do I wish to see if what fits to find it didn’t.
Who can list this size for barrel TP sealing and or a full schematic kit relative to this MKIII?
One of you guys should start a O-ring/full schematic individually bagged kit business.
That’s my only gripe with Airguns. The maintenance.
View attachment 590062
Barrel Kit Only? Are you kidding me? There’s no way I can tell what goes where. That little one in the bag was stuck under the sticker. Not even sure if it belongs in there. Think I should move next to a airgun shop. The soft screws are annoying also. Looking for someone to service it completely and replace with the SS screws.
View attachment 590063
Click to expand...
O rings are a process for sure. Individually measure and label each one. Full kits should be available from the manufacturers. Some companies are providing schematics with all the information and locations, but all of them should be.
 
  • Like
Reactions: JamesD.
Upvote 0
Gerry52 said:
As said above, FX website, under Support has o-ring sizes listed for each gun in their exploded diagrams. However you'll need a caliper if you don't already own one! Absolutely an ESSENTIAL tool for airgunners. Almost impossible to get along without one if you're an airgun owner.
Click to expand...
Agreed!
A caliper is an essential tool.
Especially for measuring O-Rings
However, when I buy an air gun, I also make a point of buying an O-Ring Kit.
And the kits with each one labeled from eBay vendor R&S (as linked above) make quick work of any leaks that pop up.
FWIW, I then often buy the most vulnerable O-Rings form places The O-Ring Store, or even from Amazon.

However one chooses to go, air guns are more than just pointing and shooting

Edward
 
  • Like
Reactions: coastal drifter, grackleblast, JamesD. and 1 other person
Upvote 0
I personally buy such sets because I don't have to look for a caliper every time and everything is labeled and packaged separately.

www.air-g-tac.com

O‑Rings & Gaskets Set (AGT00050)

Achieve perfect sealing for FX airguns with our O‑rings and gaskets set. Designed for Panthera/Dynamic/King/DRS for ultimate durability.
www.air-g-tac.com www.air-g-tac.com
 
  • Like
Reactions: JamesD.
Upvote 0
JamesD. said:
I have the barrel O-ring kit but I hate that nothing is labeled nor do I wish to see if what fits to find it didn’t.
Who can list this size for barrel TP sealing and or a full schematic kit relative to this MKIII?
One of you guys should start a O-ring/full schematic individually bagged kit business.
That’s my only gripe with Airguns. The maintenance.
View attachment 590062
Barrel Kit Only? Are you kidding me? There’s no way I can tell what goes where. That little one in the bag was stuck under the sticker. Not even sure if it belongs in there. Think I should move next to a airgun shop. The soft screws are annoying also. Looking for someone to service it completely and replace with the SS screws.
View attachment 590063
Click to expand...
Digital calipers?
 
  • Like
Reactions: JamesD.
Upvote 0
6gun said:
Digital calipers?
Click to expand...
JamesD. said:
Barrel Kit Only? Are you kidding me? There’s no way I can tell what goes where. That little one in the bag was stuck under the sticker. Not even sure if it belongs in there. Think I should move next to a airgun shop. The soft screws are annoying also. Looking for someone to service it completely and replace with the SS screws.
Click to expand...
An Airgun Shop next door to a Pizza Place ,next to a dive shop!
You could then eat, sleep, and breathe airguns like the rest of us
 
  • Like
  • Haha
Reactions: coastal drifter, 6gun and JamesD.
Upvote 0
SilentSquirrel said:
An Airgun Shop next door to a Pizza Place ,next to a dive shop!
You could then eat, sleep, and breathe airguns like the rest of us
Click to expand...
Or amass a crippling qty and weight in tools.

If you 3d print, or wish to seek one out there are oring cones they keep in industrial hardware stores and you can quickly find the id and cross section of almost every size oring for the fx aside from some of the tiny reg and valve pin tail sizes ones.

I just blind rebuilt a friends raw 1000 with calipers and alternative "close enough" sized orings from an industrial hardware store because I wasn't paying Martin's price.... Even if curating the orings is sort of worth what he asks.
 
  • Like
Reactions: JamesD.
Upvote 0
6gun said:
Or amass a crippling qty and weight in tools.

If you 3d print, or wish to seek one out there are oring cones they keep in industrial hardware stores and you can quickly find the id and cross section of almost every size oring for the fx aside from some of the tiny reg and valve pin tail sizes ones.

I just blind rebuilt a friends raw 1000 with calipers and alternative "close enough" sized orings from an industrial hardware store because I wasn't paying Martin's price.... Even if curating the orings is sort of worth what he asks.
Click to expand...
Nice going @6gun!
I think it outrageous that a manufacturer charge an outrageous price for an O-Ring kit.
It says a great deal about how he really feels about customer service.
I hope you recorded all the sizes you came up with for the Raw 1000
If you did, may I suggest you publish the list for other users
(Full transparency: I do not own one)

just my 2 scents
Edward
 
  • Like
Reactions: JamesD.
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu