does anyone happen to have the screw dimensions for the stop plates on the 95/striker/edge/etc.? my screws must not have been tight enough, as the pressure from my scope mount snapped the screws in half about 500 shots in.
Hatsan stop plate screw dimensions?
- Thread starter sticman77
- Start date
I would just use the scope stop threaded screw hole and use that hole for the rear scope stop roll pin from Sportsmatch mounts or the threaded stop grubscrew from UTG or other generic rings or just use BKL 1 Piece .007 droop compensated mounts no scope stop needed whatsoever.
Upvote 0
that makes sense. though i've always been worried about pushing one of those in too far and causing issues with the piston.
i feel like everytime i've tried to modify something on an air gun "not standard", i end up breaking it. which is also why i am finally jumping into the world of high end pcp's... no modification needed.
i've literally spent enough on the cheap stuff (that i somehow keep breaking) that i could have just bought a nice pcp by now
...but still would like to get the scope stop plate back in, as i doubt i'll ever stop enjoying springers
Upvote 0
Use a scope stop. Email Hatsan and ask them for a Magnum scope stop. Gamo also has them. The one on the rifle is from Hatsan the other a gamo 
Upvote 0
Use a scope stop. Email Hatsan and ask them for a Magnum scope stop. Gamo also has them. The one on the rifle is from Hatsan the other a gamo
thank you! emailed hatsan. hoping they will send some free as this has happened on 2 strikers, and a supercharger so far
Attachments
Upvote 0
Sticman did you ever find out this screw size? I need to replace the ones on my Hatsan Mod 25 Supercharger / Supertact pistol which also sheared off. They look like M3 (3mm) and if that's what was on your Mod 95 it would be confirmation and a big help in ordering high-grade steel replacements.
I prefer to not give up the rail space for a mountable scope stop as others here recommended but if you went that way did you successfully find one for the Hatsan 11mm dovetail (if that's what your gun has)?
Last edited:
Upvote 0