Umarex Notos leaking through the barrel.

Dang…what did Canada do to you. I have a valid excuse, believe me being a truck driver from Michigan. Lol
What didn't the leaf do? The maple menace needs to be raked.

NO.jpgDeeskuzt.jpgNIghtmarefuel.jpgFrogfailures.jpg
 
Last edited:
  • Like
Reactions: Trucker3573
God's got my back. The final raking to the leaf question is near.
When the almighty uses a winged creation to incinerate the maple sap bleeding frenchglishmen with a herring, you know its bad. To hell with pillars of salt and crumbling Sodom and Gomorrah, Burn by way of incendiary Lingcod. Take that Anne Murray

14ien7.jpg
 
Well...(deep hole in the ground), I tried ordering a complete set of o-rings for the Notos here in the states. No one seemed to offer them except a outfit in the UK. $34 US bucks, soooo we'll see how that turns out (if I actually receive them). Crossing my fingers on that one??
At least you will get to know your gun very well. Good luck!
 
  • Like
Reactions: 20PPC
Well...(deep hole in the ground), I tried ordering a complete set of o-rings for the Notos here in the states. No one seemed to offer them except a outfit in the UK. $34 US bucks, soooo we'll see how that turns out (if I actually receive them). Crossing my fingers on that one??
Got the Notos running again..."what a pain...lol!" The o-ring kit from the UK showed up with no problems (I was a little concerned about that). I used (5) of the o-rings and that solved the problem. The poppet value wasn't the problem nor the regulator. The o-ring on the threaded piece on the block was the problem as RoosterCogburn suggested. I changed any other o-ring that looked suspicious. Aired up the gun and it held pressure and everything worked.

Went to the range this morning and it's shooting very well again

Thanks again to everyone's suggestions.
 
Last edited: