I got a .25 RTI Mora Sniper for my new hunting rig. It’s currently shooting 60 grain ALTAROS ATP Queen boat tail slugs at 920fps which is giving me 112fpe! With a lot more room to add more power.
Last edited:
RTI New gun
- Thread starter CBR400RR
- Start date
Congratulations! That is one beautiful beast! Enjoy shooting that slug slinger! Nice pics 
.
.Upvote 0
I didn’t like the OEM butt pad as it wasn’t adjustable and it would pop off too easy. I bought the adjustable Saber Tactical butt pad and modified it a little to make it fit which works great.
Upvote 0
Hello. How high did you set the regulator? I see that the rail under the bipod is the same as mine, i.e. as close as possible to the trigger through the weak cylinder cover (it bends). Despite this, I felt that there was little stability until I bought a bipod utg Goliath. This great bipod and wide legs give a certain position. For now, I'm using an altar 49.5gr and I'm satisfied, but I think I'll try 60gr.
Upvote 0
I set my regulator to 150 bar and about 2 lines showing on the valve. I haven’t had a problem with my bottom rail bending. I use the Atlas PSR bipod and I found that having it set to 90 degrees straight down gives it a better balance and 45 degrees facing back gives it about a 50/50 balance.
Upvote 0
Here is .25 Mora sniper with Altaros King - 66 grain (183J or 136fpe) and 293m/s or 961fps and is deadly precise 
I think this is maybe the maximum you can get from this rifle:
I think this is maybe the maximum you can get from this rifle:
Upvote 0
I would say yea thats probably about it! Big power for a 25 cal. You must be right at 200 bar?Here is .25 Mora sniper with Altaros King - 66 grain (183J or 136fpe) and 293m/s or 961fps and is deadly precise
I think this is maybe the maximum you can get from this rifle:
View attachment 586947
Upvote 0
So how did you set the first regulator? How long does it take to fill the plenum between arrows?Yes... 200 bar.
Upvote 0
Did you adjust anything else besides the valve? Rear pneumatic hammer?
You have an incredibly efficient copy if there is only 150bar on the regulator and as much as 920fps
Upvote 0