Hello All! New to the PCP world, just picked up my first from Airguns of Arizona. It’s a Daystate Alpha Wolf HP .30 with 23” barrel. Currently shooting the JSB Diabolo Exact 50.15gr pellets. Trying to figure out regulator pressure. There is a factory setting for this grain pellet and it sets the regulator pressure to 195/196. With a full tank at 240 Bar, I can only shoot a couple of mags before it drops below the regulator setting and gives me the low pressure warning. Curious if there is a better tune or regulator setting that is lower so I can get more shots out of the tank. Please forgive my ignorance as I am still learning about all of this but figured I’d reach out and see if anybody can share some of their knowledge/experience. This gun is amazing and I’m excited to see what it can really do as I learn!
Daystate New Daystate Alphawolf Owner With Some Questions
- Thread starter Azn8gram
- Start date
Set the reg to 140 bar and try to get your desired speed. If it doesn't set the reg 5 to 10 bar higher.
Upvote 0
Welcome to the Rabbit Hole of Air Gunning. Very nice setup for your first airgun. I have several guns from AoA, and they are happy to help with questions on setup and getting the proper performance. One thing you can do is upgrade your tank to a 700 CC, which will help your shot count, but adds a little more weight., the other is try some liter pellets, 44gn and even 29gn with lower reg setting like @candiru sauggested is drop the reg down and start coming back up in 5 bar ata time untill you get the right speed and accurecy you are looking for.
Upvote 0
I just ignore the regulator pressure, when in factory mode the gun automatically adapts the voltage and dwell time to keep pellet speed consistent. It's a new gun and I didn't touch the regulator knob yet, I just left it at factory setting. I might experiment with it a little more in the near future. But I can keep on shooting at 860 fps until +/- 120 bar. Essentially the gun becomes an unregulated gun in this way, but with automatic speed ajustment to keep speed steady.
Upvote 0
This is good info. Mine is at 146-150 and shoots the 50 gr 880-890 no problem. Seems to really like 50 grainers too.
Upvote 0
My buddys delta likes them too. So does my Epoch, much lower preasure on the Epoch though. 890s at 1400psi.
Upvote 0