Re-read: Help Needed Filling an LG400

The LG 400 should come with a standard Walther fill adaptor, that will look like this-

Link to adapter at Champions Choice:

Link to adapter at Best Fittings:

To connect the adaptor to tank you will need this-

and this quick disconnect fitting-

It looks confusing, I know. But it is quite easy.

Best Fittings ships very fast to the US, and their stuff is extremely high quality.

AOA shows at least one of Best Fittings products on their website, you might call them...

I recently went through this with a Steyr I had purchased used, which did not come with the 'adapter' which Steyr normally includes with the gun to allow the fill adapter to be used with a 300 bar air tank.

I was able to get a 300-200 bar in-line adapter from AoA to be able to use the standard Steyr fill probe. But I knew that this would not be the best solution in the end, as one loses air every time you detach the cylinder from the fill probe.

So at the same time I ordered one of the through-drilled adapters from Best Fittings. It is one which is referenced above, which included a Foster male to connect directly to my fill whip. For Walther it is on this page:

https://www.bestfittings.co.uk/shop.../walther-fill-adaptor-coarse-thread-pre-2012/

Best Fittings stuff is designed very well, and of high quality. This solution to filling the gun's air cylinder is the closest thing to the cylinder having its own quick fill port. It works just like on a 'regular' air gun, where the pressure from the fill bottle or compressor has to overcome the pressure in the cylinder, to open the check valve. And no air is lost on disconnection.

I think it took 2 weeks to get my Best Fittings order delivered to California, seemingly a majority of that time in U.S. Customs.

I have a LG400 i the 10 meter match configuration and I get something like 400 shots a fill.
Trigger is heaven.

I just ordered a walther lg400 FT model and I need to know what adapter i need to fill the removable air cylinder with my compressor that has the foster quick connector. I added photos of the connector at the end of my hose from my pump.

Doesn’t anybody fill there pcps with a compressor?

Brianburgess11 said:

Doesn’t anybody fill there pcps with a compressor?

Click to expand...

Something like this. This is what I bought when I got my Walther LG400 just a few months ago.

Kgphotos said:

Something like this. This is what I bought when I got my Walther LG400 just a few months ago.

Search Results for Din 300 to foster | Pyramyd AIR

We have great deals on air guns, airsoft, pellet and bb guns and accessories. This is your one stop shop air gun mall. Check us out today!

www.pyramydair.com

Click to expand...

Thats just two females scissoring. Im looking for this adapter, but with a male foster fitting.

Brianburgess11 said:

Thats just two females scissoring. Im looking for this adapter, but with a male foster fitting.

Click to expand...

If your compressor doesn’t have a male foster connection then use this adapter as well.

Awesome, thanks