Total length from the back of the block/receiver to the muzzle is 32 5/16", that's with the 700mm barrel on the DRS Pro. If by shroud you mean the cylinder diameter, that is 1 5/16"
The block/receiver is 5 5/8" x 1". The 5 5/8" is from the back of the block to the front where the barrel and cylinder attach. It's also to the front of the plenum.
I can't get the dimension of the trigger group without taking the barreled action out of the chassis. I can't take it out without degassing and removing the angled manometer block and gauge which I don't want to do at this point because I'm in the process of selling it.
Sorry my phone autocorrected I meant Huma airguns, I didn't know Utah AG sold em just as a base is that new?
i am not sure i beleive within the last few months or so. but yea 1200 for a drs pro is worth it imo especially if your capable of making your own chassis. i own several mdt chassis but thought i would try somthing new this time. i always liked a manners. what type of chassis do you plan to make?
