I have 5 - 13 shot magazines for it. The aftermarket magazines are much better made than the OEM
It has an internal moderator in front of the muzzle inside the shroud, and it has an external moderator that screws on to the shroud, both made by Murphy.
You can see that the inside of the stock has been painted flat black, I have tried to capture a ding in the stock by the pressure gauge in one of the photos.
I will ship it as pictured, in the case with the scope and rings on the side and the bipod attached.
In the post office ready ship box, I put the external moderator, 5 magazines, some pellets, and a 3-D printed single shot tray. It will be shipped in the brown rifle case, the case is sprung and doesn't close properly, but it is perfect for shipping, and storage. I will make sure it is secure and boxed well before shipping.
It holds air very well; the bottle is a 200bar/3000psi fill.
I had an issue with the trigger a while back, and I solved the problem with some thread lock on the set screw at the back of the trigger. The trigger and cocking lever were also polished by Air Gun Restorations when I first purchased the gun from Airforce out of Texas. In the case with the rifle are some 25 yd targets, I shot a while back. I purchased the gun for 799.00 plus shipping. I am including in the sale, extra magazines, a scope, rings, and a bipod.
I am asking $400 PayPal F&F and 1/2 the shipping. (Shipping is about $60 thru Pirate Ship)
It has an internal moderator in front of the muzzle inside the shroud, and it has an external moderator that screws on to the shroud, both made by Murphy.
You can see that the inside of the stock has been painted flat black, I have tried to capture a ding in the stock by the pressure gauge in one of the photos.
I will ship it as pictured, in the case with the scope and rings on the side and the bipod attached.
In the post office ready ship box, I put the external moderator, 5 magazines, some pellets, and a 3-D printed single shot tray. It will be shipped in the brown rifle case, the case is sprung and doesn't close properly, but it is perfect for shipping, and storage. I will make sure it is secure and boxed well before shipping.
It holds air very well; the bottle is a 200bar/3000psi fill.
I had an issue with the trigger a while back, and I solved the problem with some thread lock on the set screw at the back of the trigger. The trigger and cocking lever were also polished by Air Gun Restorations when I first purchased the gun from Airforce out of Texas. In the case with the rifle are some 25 yd targets, I shot a while back. I purchased the gun for 799.00 plus shipping. I am including in the sale, extra magazines, a scope, rings, and a bipod.
I am asking $400 PayPal F&F and 1/2 the shipping. (Shipping is about $60 thru Pirate Ship)
Last edited:
