Time to share my latest new to me trick
I’m totally stoked about my new method for creating solid dope.
First I zero my gun at rhe middle point of pellets trajectory - say at 30 yards
then
I draw 2 thin horizontal lines .20 apart on a stiff stock paperboard And place the target at EXACTLY 10 yards
I aim at center point between the lines and shoot
I compare my point of impact to my point of aim and determine my aproximate holdover
But
I adjust my POI using clicks until all my shots fall perfectly between the two horizontal lines
I then adjust the ballistics APP scope height until the point of impact matches the clicks necessary to fall perfectly between the two lines.
next I shoot only using clicks at a variety of small 1/4” to 1/2” targets at known distances from 9 yards out to 60 yards
I also set out NR/ BR 50 cards taped to blocks of putty to evaluate if any odd trend or drift is occurring
this new Way of creating dope by validating with clicks is way more accurate than just visually using a holdover value.
I’ve redone dope on four different HFT rigs and it’s like they are different

guns.
No worries The Thomas got plenty of attention afterwards