Notos aftermarket moderator options....

subscriber said:

007**

@Firewalker is the Notos expert. If you place an at sign in front of a user name. he gets notified of your post.

To get the stock baffles out, drive out the two retaining pins (near the front of the casing) out first. Punch them from the small end of the pin, no the wide end.

Click to expand...

subscriber said:

I would not assume anything. Best get input from people who have take the Notos mod insert out. I do not even have a Notos. As odd as that seems.

Click to expand...

007*** said:

Thank you! I assuming the "small end" is at the top of casing, wide end on bottom/underneath.

Click to expand...

Tuning - Umarex Notos has arrived.

Yes i don't use the factory shroud as I made my own. For the .177 I used 3D printed cones for the Umarex origin and for the .22 I use five cones from the Marauder rifle. For scope, I use an dovetail to picatinny adapter on the front side. The back I cut a piece of blank picatinny rail. All of...

www.airgunnation.com

nobody1 said:

The knurled/wide ends are on top.

Read my post which has lots of detail:

Tuning - Umarex Notos has arrived.

Yes i don't use the factory shroud as I made my own. For the .177 I used 3D printed cones for the Umarex origin and for the .22 I use five cones from the Marauder rifle. For scope, I use an dovetail to picatinny adapter on the front side. The back I cut a piece of blank picatinny rail. All of...

www.airgunnation.com

Click to expand...