Kral arms shadow regulator air leaking
- Thread starter Rmils123
- Start date
The regulator is between the bottle and the rifle. You need to remove the bottle. turn clockwise to reduce or anti clockwise to increase.
Only 1/8 of a turn at a time. Re-assemble, refill and test. See page 26 of the manual.
Upvote 0
Spilt it where the yellow arrow points. The reg adjustment screw is inside.
Mine was leaking by the small hole and I had to replace all the o-rings inside the reg.
Upvote 0
Just loosen the pressure gauge a small amount until you can hear air escape. Leave it to drain. You may have to loosen it a bit more during the process. NEVER UNDO IT ALL THE WAY WHILE THERE IS PRESSURE IN THE SYSTEM.
Upvote 0
Yes, I pinched the rifle between my knees and used both hands to unscrew the bottle.
When the bottle is out you must dryfire once to get the air out of the plenum before you turn the reg clockwise.
When the bottle is out you must dryfire once to get the air out of the plenum before you turn the reg clockwise.
Upvote 0