GX cs4 cs4-i duty cycle update from Manufacturer

Asher said:

I should have but didn't. I just dumped the water, removed the case and mostly took apart the cylinder. It's tricky as there are 4 screws on the bottom part near the crank that need to be removed and are also tricky to line back up when re-assembling

Click to expand...

1900colt said:

I don't know if he ever blead out the factory one, if not, high temps would definitely occur.

You can actually feel the air blowing out warmer at the bottom and cooler at the top when there is air trapped in the radiator.

Click to expand...

1900colt said:

The compressors have handled the larger tanks for over 2 years now.

I wouldn't be to concerned about it.

If the water is filled correctly and no air pockets these compressors really do not get that hot.

When I test them, they are ran close to a constant 3800psi for at least 20 minutes and in that time they really stabilize their temps.

My only guess is the airsoft crowd doesn't like the fill speed... they buy a lot of these, and other compressors. They will take their large tanks down to a couple hundred pounds before a refill. The K5-1 or 2 would make much more sense for them.

Click to expand...