3d printed carbon fiber charging handles for the Karma Red Panda

rodjava · Tuesday at 12:51 PM

I 3d printed a couple Karma Red Panda charging handles. Printed with carbon fiber PA612-CF Carbon Fiber Nylon Filament and with 2 embedded stainless steel rods for added strength and added weight. Made 3" and 4" versions for testing this week.

rcs9250 · Tuesday at 12:57 PM

I’m typically not a fan of 3D printed items but darn, you did a nice job.

rodjava · Tuesday at 1:02 PM

rcs9250 said:
I’m typically not a fan of 3D printed items but darn, you did a nice job.

Thanks for chiming in. There are some custom charging handles made from solid aluminum or brass. The next best is a 3d printed version made with carbon fiber or other filaments that won't warp in high temperatures. It's just "bling" anyway.

Arkansas_Airgunner · Wednesday at 12:19 AM

I would be willing to buy 1 to try out, if you were to allow me to purchase 1. Karma RP is next on my shopping list for bench guns

rodjava · Wednesday at 8:11 AM

Arkansas_Airgunner said:
I would be willing to buy 1 to try out, if you were to allow me to purchase 1. Karma RP is next on my shopping list for bench guns

I will be testing both sizes at the range today. If they both work out, I will make them available to the AGN membership at an affordable price.

rodjava · Wednesday at 4:18 PM

I can report that the 2 different charging handles I 3d printed for my Karma Red Panda worked out incredibly well!

3 inch - 70 grains / 1.16 oz
4 inch - 103 grains / 2.4 oz

Search

Search

3d printed carbon fiber charging handles for the Karma Red Panda

rodjava

Member

rcs9250

Member

rodjava

Member

Arkansas_Airgunner

Member

rodjava

Member

rodjava

Member