Just in case yall wanted to see what’s inside of the Sekhmet digital gauge. Gen 1 pro. I had one that was dead. Asked a few times in a thread and via emails if the battery was replaceable. Didn’t really get a response except to offer a new gauge at a discount.
So for those wondering. NO you can not replace the battery. It and the rest of the parts are siliconed and or epoxied in.
Using a sharp pointed blade at the edge I was able to get under the face and work my way around. It’s put on with some very solid 2 sided tape and you pretty much destroy the gauge separating it. There is also a very fine circuit at the top that you can’t help but cut when you do it.
So for those wondering. NO you can not replace the battery. It and the rest of the parts are siliconed and or epoxied in.
Using a sharp pointed blade at the edge I was able to get under the face and work my way around. It’s put on with some very solid 2 sided tape and you pretty much destroy the gauge separating it. There is also a very fine circuit at the top that you can’t help but cut when you do it.
