Air Arms Need small part for Pro Sport

Need the pictured "washer" in red for a Pro Sport. The parts listing calls it a "Cocking Lever Buffer" part #PS417. Pyramyd Air does not list it. Anyone know where to source this, or what the exact size is? Thanks for any help.

Red cocking lever buffer for PS.JPEG
Red cocking lever buffer for PS.JPEG
 
I would say you need to get some measurements! Thickness, outside and inside diameter and head to Ace hardware. Find a nylon or delrin washer that's close as possible to those measurements. It's only there to prevent damage to the cocking arm when returning to battery position. Maybe been slamming it home a little to hard is what broke it.
 
  • Like
Reactions: airgunner53
I would say you need to get some measurements! Thickness, outside and inside diameter and head to Ace hardware. Find a nylon or delrin washer that's close as possible to those measurements. It's only there to prevent damage to the cocking arm when returning to battery position. Maybe been slamming it home a little to hard is what broke it.
Or maybe I just bought the rifle and it was already broken, but thank you. Not to mention that it was broken into quite a few pieces, most of which are missing.
 
Last edited: