FX Drs classic 700

Jump to latest Follow Reply
Well so far I have had pull the valve the front cap was loose enough in it's spot the valve stem let air leak by so I found it empty today replaced that orings and now the valve has a tad more preload with the cap turn most of the way in .218 40 gr 860 I was able to get I ran out of 34 gr pellets so it is kinda hard to judge after the valve spring being loose
 
  • Like
Reactions: Impact701
Upvote 0
woogie_man said:
Why doesn't fx make the rifles from the factory to shoot slugs? They KNOW people buying these rifles will typically shoot slugs, if not you can turn the power down. Just another way for them to squeeze money out of people. Same as the barrels they use.....need a carbon liner, then add more things that should be done at the factory.

Especially when you figure what these guns costs.
Click to expand...
Utah just released a video on the drs. They say the 700 mm comes with the slug power kit and heavy liner from the factory. I don’t really get this particular platform for chasing slug power though. Fx makes better options. Shot count has to be pretty bad on these when maxed out. Esp in .25. Just seems like it should be a pellet shooter
 
  • Like
Reactions: SteveV and woogie_man
Upvote 0
Trucker3573 said:
Utah just released a video on the drs. They say the 700 mm comes with the slug power kit and heavy liner from the factory. I don’t really get this particular platform for chasing slug power though. Fx makes better options. Shot count has to be pretty bad on these when maxed out. Esp in .25. Just seems like it should be a pellet shooter
Click to expand...
Well I didn't get a pin probe on my 700 drs I'll have to look into that
 
Upvote 0
Test shoot em tomorrow I guess. I'm a beginner caster at best so bear with me lol

IMG_20240504_210505826.jpg


IMG_20240504_210510214.jpg
 
  • Like
Reactions: tibor
Upvote 0
Red wolf is pretty much a tripod baby or using a bipod and 25 gr pellets are about as hard as I want to push it I have gotten 980 with 34 gr pellets from it but that's really laying it on hard not being a balance valve so my drs was bought with Intention to pour these slugs and hopefully the shoot good I have a lot of lead 36.6 is about what they are dropping for weight
 
  • Like
Reactions: Dairyboy
Upvote 0
Airgunmann said:
Darn it just got everything sealed up otherwise I would have pulled the plug to look
Click to expand...
That is my issue. I don't want to release air to find out.
Trucker3573 said:
I think it is for adding a regulator pressure gauge so you know where the reg is set while tuning.
Click to expand...
That is what I thought but another member told me no.
 
Upvote 1
Justaguy said:
That is my issue. I don't want to release air to find out.

That is what I thought but another member told me no.
Click to expand...

Trucker3573 said:
I think it is for adding a regulator pressure gauge so you know where the reg is set while tuning.
Click to expand...
I've had mine apart. It is not made for a gauge. My guess is the same as Airgunmann, it is for machining the inside of the plenum.
To add a gauge to the SHP plenum you have to
Screenshot_20240505_095848_YouTube.jpg
install an angled manometer bracket.
 
  • Like
Reactions: Airgun Al, Dairyboy and Justaguy
Upvote 0
Impact701 said:
I've had mine apart. It is not made for a gauge. My guess is the same as Airgunmann, it is for machining the inside of the plenum.
To add a gauge to the SHP plenum you have to View attachment 461874install an angled manometer bracket.
Click to expand...
I am determined to circumvent the angled adapter. I just don’t like it or the idea of having to buy it.
 
  • Like
Reactions: Impact701 and Dairyboy
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu