Skout Sniper Slug - Official Release

Jump to latest Follow Reply
Airfuture said:
I would rather say 3 milliseconds
Click to expand...
The settings are programmed into the EPOCH screen and can be adjusted from 10-50 in increments of 1 in program mode. The valve and transfer port are very large relative to other PCP designs. It seems to work well with their valve and flow design. I believe the dwell in this case is how much LP air is let in over time thru the solenoid until the high pressure side over rides it to close the valve. I have also noticed that the LPR will follow the HPR up/down but can also be throttled down or up manually for specific tuning. My question would be if you have a higher LP setting should the dwell be decreased since you don't need as much due air, due to the higher pressure, to open the valve??

Lewis posted this picture below of the valve vs FX valve pin.

img_4732-jpg.339984
 
Upvote 0
Ta-Ta Toothie said:
I understand that, but this cost more than many .22 PB ammo. Heck, slugs should be cheaper then pellets but there not cause we just accept that. Price it right and they will recover the cost by selling more quantities. I'm just not pulling the trigger on any of this for a quarter a shot. Hopefully the Zans will be promising...
Click to expand...

This is my conundrum as well, I can get Ely Tenex for $.50 or a .25 slug for $.22 a round.

I get sub MOA all day with the apparation, can the Scout match it?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu