• The buying, selling, trading, or gifting of a standalone airgun moderator is no longer supported in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

PCP Pistol Benjamin P-rod Carbine

Classified Status
NLA

DougH.

Member
Feb 12, 2018
262
106
Virginia, United States
Feedback: 51 / 0 / 0
I don’t really want to sell this little gem but I would like to underwrite the cost of a new addition to the collection. This P-rod shoots really well. Also includes (4) magazines.

She is tuned down to 612 fps avg for 32 shots per fill with JSB 15.89’s for barn pesting. Has the Hill Matched Pistol parts kit installed ($135 value), stock hammer with the Hill Peek delrin striker. Shot string below is from 3000psi to 2000psi and then starts dropping off due to the light tune and heavier Hill valve spring, which also prevents the notorious P-Rod hammer bounce, wasting air. Still has three turns left on the hammer spring for considerably more power. Consistently getting four mags per fill with a 19fps spread with this tune. Kills squirrels, no problem with good shot placement, which is very easy to do with this little tack driver. FX Dreamline folding stock adapter. 21” total length when folded. I also have the Crosman skeleton stock if you want that instead of the folding stock set-up. See build list below.

New Prices:
Gun $429
(3) extra magazines $45
Hill Matched Pistol Parts Kit $135
Peek striker $23
RAI AR stock adapter $70
FX Dreamline Folding adapter $80
Buffer tube $20
UTG Pro AR stock $25
UTG pic/sling stud rail. $15
Bushnell Trophy Red Dot $100
1/2-20 Moderator adapter $20. (not the DonnyFL one but works perfectly) *Original shroud end cap will be included.


The barrel band has been tapped with 10-32 machine threads and a sling stud installed, which holds the for-end on, instead of the OEM 8/32 screw. No holes drilled. The front pic adapter is supported by the sling stud, not the plastic for-end.

I have well over $950+ tax/shipping for everything in this set-up, counting the red dot. Holds air indefinitely and is a tack driver with the JSB 15.89 pellets. Target pictures below are two full magazine (8 shot) groups with current tune described above and in the chrony pic below. Very consistent accuracy and fps. Groups were shot at 50yds using 4-16x44 glass. Right to left breeze at 3-5mph. Also shoots the Crosman Premier domes very well. Not pellet picky.

$400 for gun and skeleton stock as it comes from the factory.

$450 for gun, skeleton stock & red dot.

$575, for the gun with RAI adapter and folding stock & skeleton stock.

$625 For everything.

**If you don’t want the skeleton stock at all, I’ll knock $20 off. **

All prices include shipping to the lower 48.

If you choose to take the red dot, it will be sighted in at 20yds, and ready to shoot out of the box.

***See Bushnell trophy red dot sight specs in the pictures below. Will not sell the red dot sight before the gun sells.***

If you want it tuned higher, I can do that before I ship it. But realize that the shot count will be less. I will provide a full-fill shot string & target groups, using the red dot at 20yds to the buyer if he/she chooses a higher powered tune.

Not really pressed to sell so prices are firm.

PP FF, Cashier’s check from bank or
USPS MO

Thanks for looking!

IMG_7483.jpeg

^Two shots did not read.^


IMG_7481.jpeg

^This is the dope with current tune if you were to use a Mil-radian reticle.

IMG_7478.jpeg

^Breeze picked up for the last three on the left

IMG_7479.jpeg

^Minus the one flier. That one was on me^

IMG_8267.jpeg


IMG_8268.jpeg


IMG_8270.jpeg


IMG_8271.jpeg


IMG_8294.jpeg
 
Last edited: