Having some fun always wanted to have a 20 caliber TX200. My friend Mark and I continually hype each other up for projects like this
I have machined the .20 LW blank to be a length of roughly 11.75" and am using a Carbon Fiber Shroud.
It will have a magnetic latch, I have to chop the underlever and rethread it for the end plug. Either that or chop it and ream out the arm for 10mm to insert the magnet directly in the lever, but I believe I'd prefer the adjustable end plug for fine tuning the magnet.
It currently is at 10.5fpe w/ 13.7gr JSB, the spring kit installed is a weak old Vortek kit that I'll be replacing w/ a new spring from Tom soon or maybe I can dig one up in my stash.
Anyways, here are a few pictures of the journey.
I have machined the .20 LW blank to be a length of roughly 11.75" and am using a Carbon Fiber Shroud.
It will have a magnetic latch, I have to chop the underlever and rethread it for the end plug. Either that or chop it and ream out the arm for 10mm to insert the magnet directly in the lever, but I believe I'd prefer the adjustable end plug for fine tuning the magnet.
It currently is at 10.5fpe w/ 13.7gr JSB, the spring kit installed is a weak old Vortek kit that I'll be replacing w/ a new spring from Tom soon or maybe I can dig one up in my stash.
Anyways, here are a few pictures of the journey.