FX Fill port replacement on fx impact m3

To the OP KAMANTHI- contact utah AIRGUNS and they’ll have the FX part you need. That is a bsp thread and the base flange has a 10 x 1 o ring underneath it that seals. Those other recommended fittings are NPT threads and incorrect for what you’ll need.
And do what was suggested, fill slow, and no ham fisting the fill procedure

On all my female long QD’s I attach a Corbin clamp on them so I truly only need one hand to remove and install the fitting, especially in a tight spot like under a trigger guard. My thumb catches the tabs of the clamp and easily pulls the fitting down to release

Bigragu said:

On all my female long QD’s I attach a Corbin clamp on them so I truly only need one hand to remove and install the fitting, especially in a tight spot like under a trigger guard. My thumb catches the tabs of the clamp and easily pulls the fitting down to release
View attachment 448771

Click to expand...

great idea.. i did not that was the correct name for them, i call them all kinds of bad names, not repeatable here

Kamanthi- said:

Thanks mate

Click to expand...

No problem sir