So crosman just had to come out with another Lego gun for us poor bastards who can't leave well enough alone.
I got home from work to find my new shiny toy. It was completely empty of air, so I fired up the compressor and filled it up to 2000 psi. I didn’t even bother with the stock breech. I took the gun apart and mounted the knock off crosman polymer breech. Cleaned the barrel good, and got out the old chrony and went to work.
Shooting 14.3s around 650 to start, and by shot 10 had climbed to the 690-700 range, stayed there til shot 25 where I stopped because the report was getting a little sharp. Not loud at the beginning, but once the air was dropping, it got snappy.
Filled it back to about 1800 psi, mounted my Sniper 3-9x32 and zeroed at my 25 foot basement range distance. Hole in hole... so I got a good barrel.
Here she is with the breech kit and scope.
I got home from work to find my new shiny toy. It was completely empty of air, so I fired up the compressor and filled it up to 2000 psi. I didn’t even bother with the stock breech. I took the gun apart and mounted the knock off crosman polymer breech. Cleaned the barrel good, and got out the old chrony and went to work.
Shooting 14.3s around 650 to start, and by shot 10 had climbed to the 690-700 range, stayed there til shot 25 where I stopped because the report was getting a little sharp. Not loud at the beginning, but once the air was dropping, it got snappy.
Filled it back to about 1800 psi, mounted my Sniper 3-9x32 and zeroed at my 25 foot basement range distance. Hole in hole... so I got a good barrel.
Here she is with the breech kit and scope.