AEA 95 Cal
- Thread starter myfalconry
- Start date
The 7000 psi compressor of course!!
I think this thing is a bit overkill but at least Bin is seeking DOT certification for the compressor and rifle.
Upvote 0
I'll wait for someone to come out with a bigger arrow shooting version. Who wants to help me load a telephone pole into it?
Upvote 0
I can't shoot a 338 in my back yard. But I can an airgun.
Can't have a Moderator in this state. But I can on an airgun
Can't have full auto in this state. But I can on an airgun.
The point isn't always people can't own PBs
Upvote 0
When the aea 95 is less than 90 decibels with a reasonable weight and size moderator I'll buy one too. I doubt that there's any moderator that's going to work very well on that gun. The Recoil is worse than a 338 lapua.
Upvote 0
.300 Win Mag uses 25% less powder and is about 50% less expensive than the lapua to achieve a similar effective range and trajectory.
But a .95 airgun?
Now that would be much more fun than either in my opinion!
Upvote 0
Right now, the world record for taking a dinasaur with a .95 airgun, is pretty easy to achive.
Upvote 0
The 7000 psi compressor of course!!
I think this thing is a bit overkill but at least Bin is seeking DOT certification for the compressor and ri
It has a 7000 psi fill capacity it’s regulated to 4500. The hypotheses is with the 7000psi you get more shots I guess. Not sure but it’s regulated to 4500. At least that’s what Ben said in a second video of the compressor. That non of Aea guns shoot 7000psi. If I understand him right.The 7000 psi compressor of course!!
I think this thing is a bit overkill but at least Bin is seeking DOT certification for the compressor and rifle.
Upvote 0
I don’t know about that, I’m sure I’m going to have to mod some stuff on it. First thing I’m going to do is a spring swap, put some good quality wolf firearms springs in it. The valve system Aea uses is just as good as anyone else’s. But they fall short on spring quality. They are cheap poorly tempered springs and they collapse. I have a aea element max that used to shoot around 940 with a 235g Mr hollow point. After a spring new stronger hammer spring and valve spring, champering the air ports and polishing them to as close to a mirror finish I’m pushing them at 1060 fps with great accuracy at 70 yards. Again the overall design of most aea guns is great, they fall on their face when it comes to the springs they use and the lack of cleaning up those air ports.
Upvote 0
Good to hear from someone that actually did improvements on the guns, and those aren't major ones so if you can get a great gun just by doing that then AEA sure is worth looking in.
Upvote 0
I'm not buying unless it comes with a minimum 10 round rotary magazine. It's gonna be a b!+<# clearing a double load.
Upvote 0
Looking at that slug, it wouldn't even need a rotary magazine. You could stack them just like cartridges. Cast a groove near the rear of slug and it could be used to extract it.
Upvote 0
It was just a little humor and sarcasm when I posted. Could you imagine how big a 10 round rotary magazine would be?
Upvote 0
I recognized it, but the whole idea of a magazine just got me thinking. It's a curse.It was just a little humor and sarcasm when I posted. Could you imagine how big a 10 round rotary magazine would be?
Upvote 0
I want one, but those numbers can't be right. A 500gr at 900fps is around 900fpe. To get to 4000fpe you'd have to shoot a 1700 grain slug at 1000fps. If the 7k air tube can really make 4000fpe that's impressive, but 4000fpe sounds unobtainable unless it dumps the entire tube of air in 1 shot. Still would be devastating at 900fpe though, very fun to play with. 
Upvote 0