Umarex Umarex g19 gen3 non blowback

You did not state if your pistol is airsoft or airgun. Replacement trigger parts are available for both.

The trigger is two-stage and double action.

I performed a Google search for:

umarex g19 gen3 co2


Umarex g19 gen3 CO2 trigger


The above video tells me that the trigger on your cheap gun is always going to suck.

Umarex g19 gen3 CO2 repair

the reality of the trigger on most replica pistols is the trigger has way too much to do and all the connecting sears and springs and what not take a toll on the amount of pressure needed to just pull the trigger
and here is the problem they are not easy to just take apart and test because of the amount of parts and first you would have to understand what does what and how what effect what
and the chances of you taking it apart or me taking it apart could lead to a box full of parts
now the guys in the UK are big replica shooters and maybe they have a fix but it would be a long shot post over on
https://airgunforums.co.uk/
they have a replica section

DOOMRIDER said:

This is an Airgun forum only.
Not airsoft.
There's plenty other forums out there for plastic ball-tag.

Click to expand...

And your point is?

My research says that this gun comes in both.

Compared to most budget priced replica pistols on the market today the Glock 19 gen 3 has a pretty sweet trigger, in my opinion, the only gripe I have with my G-19 gen 3 is the small trigger guard and sharpness of the trigger shoe, but the trigger pull is fairly light and quite predictable, I've found that if I place my trigger finger along the slide and use my middle finger to squeeze the trigger it works very well.
Personally I'd advise against trying to take the pistol apart and try to lighten or smooth the trigger, it's a $60.00 air pistol that shoots pretty darned good as is out of the box (at least mine does), but what ever you decide, good luck with it.