My friend shooting his M3 at 62 yards with 18.13 grain .22 jsb pellets unsorted with magazine, batch number 220, 960 fps 18 shots group, one flyer. Group size outer to outer 0.485"
Wonderful shooting.
Wonderful shooting.
Last edited:
Well, I was shooting at 968 and I saw they were very accurate. So I decided to follow a few guys from YouTube with there settings but don’t had the same results. So I believe like you said, they need between 940 and 970fps. Good job!I see that Polygonal barrels prefer fast speed. FX barrel is also some kind of soft groove barrel similar to Polygonal.
We have seen that FX Impact doesn't follow the rule of fps from 850 to 920 for extreme accuracy. Rather these barrels become extremely accurate when they run apparently hot like 940fps to 970fps with 18.13 grain .22 jsb.
That’s nice, and then you go to wich settings on 100?Solid group there. I tried 950 in my Crown with 700mm. They shot well to 75 yards. At 100 they were like a curve ball.
I don’t understand your question. I didn’t change settings at 100. I put my 700mm barrel on my crown and gave it a loose tune at 950ish fps with 18.13’s. They shot well up to 75 yards. When i shot them at 100 yards they were all over the place.That’s nice, and then you go to wich settings on 100?
My friend shooting his M3
I think he had already shooting his gun when he started recordingdid he recycle the first couple shots? or the cold sticking oring is fixed now?
![]()