I was going to have this thing custom cerakoted and whatnot , and maybe in the future I will take it apart and still have that done but for now its going to see field use so I just threw a black top rail on, kl ex trigger guard, 700cc bottle w/ wrap, and my ATN 5-20 on it.
It also has : Huma high flow probe, huma slug power kit (lighter of the two hammer weights installed), huma extra pressure reg, and huma transfer port along with 2 digital gauges, all of which I installed myself, had one small leak through the atmospheric vent hole but sorted that out and its good to go
It is running the HEAVY SLUG LINER with CF sleeve w/ the ernest rowe style barrel tensioning rear screw.
Reg is at 180 bar , 2.5 lines on the valve, and 5 on the hammer spring adjuster
Shooting Zan .218 30.5 slugs at 1055 fps. Need to test accuracy next at the range with this setting, for some reason the reg is just at 180, screw bottomed out so I can only bring the reg up from here , maybe thats just the nature of the huma extra pressure reg.
It also has : Huma high flow probe, huma slug power kit (lighter of the two hammer weights installed), huma extra pressure reg, and huma transfer port along with 2 digital gauges, all of which I installed myself, had one small leak through the atmospheric vent hole but sorted that out and its good to go
It is running the HEAVY SLUG LINER with CF sleeve w/ the ernest rowe style barrel tensioning rear screw.
Reg is at 180 bar , 2.5 lines on the valve, and 5 on the hammer spring adjuster
Shooting Zan .218 30.5 slugs at 1055 fps. Need to test accuracy next at the range with this setting, for some reason the reg is just at 180, screw bottomed out so I can only bring the reg up from here , maybe thats just the nature of the huma extra pressure reg.
Last edited:
somebody buy this guy a beer or beverage of his choice. Great looking setup
