Recent content by xsiv4s

Sorry, I guess that would help. Texoma Precision Pellet

Just let me know if you have a Umarex Hammer with the older style magazine (Without the rubber insert), and I will size them .511" so they don't fall out of the magazine.

Yeah, I do it by hand in seconds (With a little hobbyist drill bit holder).

Older mags can be upgraded with a tiny drill bit. The old springs (If I remember correctly) are 1.07mm with the new ones at 1.13mm, so the hole must be made a hair larger to accommodate the newer, heavier spring. Macabespeed has come up with a stick magazine for higher capacity, and I am looking...

That would be me and me. I've made around 100,000 of the 155gr hollow skirt pellets (60k or so for Bintac). Among my 30 aftermarket AEA parts are CNC mag covers for the BW S45 as well as 7-round and 8-round inserts. I also make the heavier 240gr pellets for the 20" and 24" barrel setup.

Well, the 45 cal (.456") at 240gr with the 20" barrel on the BW S45 is traveling at 900fps, I believe that is Colt 45 numbers. They fought me for a year on using a longer barrel, and the 20" worked great; so, now in about a month, they are releasing a BW S45 with a 24" barrel.

I am mostly doing behind-the-scenes stuff. I have repaired a few customer guns, but I mainly modify current and new releases. The attached picture shows the surface of a factory BW S45 bolt (In their 357 model). My prototype bolt for the BW S45 in 50cal is on the right. The upper portion of the...

I totally agree. I cannot go into detail on what is coming this year, but a couple of the products are just unbelievable. With over thirty custom parts and a lot of custom work, they also help keep me in business. Even their most problematic gun, the BW S45, works very well after a little...

I think there are a couple. There is a company that released one in November and I thought AEA released one through a single AEA vendor. I had a guy send me a pic of one he made for the pistol (Shorter rod) and he was working on a side handle to rack it.

Absolutely, this was definitely a lark. I sell a few hundred a month and 95% of them are #8 shot and #4 buck. My favorite, from a destruction point of view, is the 50cal shells. It has three 50cal 200gr balls in each round.

I'm certain you didn't buy from me, but I would still be happy to switch out the barrel for a different length if you want (I make all the barrels and air chambers for this). My personal favorite is the six-inch air tank and ten-inch barrel, lots of very accurate shots.

Thanks for the purchase, my favorite is a 10" barrel and six-inch tank, It is still very manageable. Also, I just made a replacement piece for the back that allows for AR stocks to be installed and removed in less than 30 seconds, basically turning it into a short-barrel rifle whenever you want.

It has been my experience that the small number of people with issues do a great deal of talking (The posts are disproportional to the actual issues). The building beside AEA in China makes Huben. China makes most of the PCP air guns and China is one company. I was the national trainer for...

No, but I just finished a new adapter that installs in under a minute and allows for AR stocks. https://texomaprecisionpellet.com/shop/product/aea-hp-max-custom-fixed-stock-adapter-allows-use-of-all-ar-stocks/

The ones posted are great, thanks.