xsarfc9x's latest activity

I made a new valve (7075 aluminum with a steel valve seat, with a custom matching poppet) for the .30 Smooth Twist barrel setup, along...

Man about time, I made one 2 years ago and showed to FX of Sweden. 1/2 20 barrel threads just past the barrel clamp. Setup to shoot the...

Ratzy on the other max1 thread posted this Shroud thread is m28x1 Donny AeA Models A83 for 1/2-20 A91 for M18x1 When I bought mine at...

Just some numbers..

Packaging didn't have a part number but it was labeled as Donny FL Challenger adapter which should be A91. I went by Alamo AG and...

For the end cap, I bought an AEA 1/2" adapter and it threaded in and works to add a moderator. Worked thru hammer spring adjustments...

I got mine in. Adjusted the hammer spring and got max speed of 967 with 30g slugs at the stock reg setting. Also picked an AEA 1/2"...

My twins have been progressing nicely. For the .25 slug action I went with a 700mm FX barrel liner. I replaced the short CF shroud that...

Very true lol

Many of mine started out cheap LOL

Shot the MAX .22 this AM. Fill gauge reads 250 bar but tank gauge reads 300 bar(just filled). Not sure what’s going on with that. Reg...

Hey Jay, After shooting and filling several times, the pressure gauge is working better. The reg might just need to be broken in.

Minty Air Arms Pro Elite in .22! Just delivered today and I'm so happy I finally found a premo example of an icon in break barrel...

[/MEDIA] You are a spectacular marksman. For fun, here's the same AG with period correct accessories from around 1984: more things...

Awesome. Post some pics of you get a chance. Mine got into KC this morning, hoping it makes its way down to TX by end of today so I...