Recent content by wruess

So the replacement battery for Red Wolf @ AOA is 7V. This one you bought is 11.1V Is that voltage difference going to cause problems???

Need a lockable case (hard or soft) to accommodate the HW44 with it's moderator attached (pistol length is roughly 19.5 inches). Most "pistol" cases too short; most rifle cases too long. Any suggestions? Thanks.

My .22 Prophet came from AoA set at about 150 bar, HS in about 2.5 turns, shooting 25.39 pellets @ 984 fps. (by their chrono test) I ran some test curves at 120, 140, 150 bar. Currently shooting JSB redesigned 25.39 @ 150 bar, HS screw in 1.75 turns from flush, 970 fps. (Max speed at 150 bar...

Another reasonably-priced option: https://www.amazon.com/dp/B07B7SB486?psc=1&ref=ppx_yo2_dt_b_product_details

Can you give us a pic of what you wound up with and/or a link to the specific one on Amazon? Thanks.

Long-time birder here w/ progressive lens glasses. I have never found any binos that I can use with my glasses on, no matter how much "eye relief" they advertise. I push the glasses up on my forehead and use the binos adjusted for my eyes w/o glasses. Had Leica for many years; currently Zeiss...

I needed quiet target, and didn't want to mess with duct seal, so this is what I'm using so far: 20 quart plastic bin from Walmart ($4.95) Piece of scrap 1/2" plywood in the bottom (free) Piece of scrap indoor/outdoor carpet on top of the plywood (to muffle sound in case anything hits...

OK, thanks. Don't need an underwear problem. Think I may just leave the gauges where they are - about 1/8 turn from horizontal. Kinda have to tip the rti a little to see them, but still functional.

Which junction should I unscrew - the bottle or the regulator?? Thanks (I'm going to need about 7/8 of a turn)