Recent content by wormbobskey

IN

Thanks

Anyone have a link to do a trigger mod on a hatsan airtact?

Got the trigger adjusted a lot better than it was. Hardware store didn't have any M3X12 screws so I had to get a M3X20 and cut it down. Still not the best trigger by any means, but definitely better than it was. Appreciate the help.

I have some of the FX hybrid slugs. My gen2 25 didn't much care for them. Is there any way to tell if the gen1 has the green mountain barrel? I'm assuming the valve and hammer spring were the only things changed. I appreciate all the information. Maybe I'll just set this one up to shoot the 34...

dizzums, are you talking about removing the barrel and pushing a slug through the breech or just through the end of the barrel? Sorry if it seems like a stupid question, but I have never slugged a barrel before. 

Does anyone have a link showing how to modify the trigger pull on a Hatsan Airtack break barrel, to remove the long first stage trigger pull? Rifle is accurate, but trigger is terrible. I'm sure I could tighten up groups if it had a better trigger.

I just finished sealing up a new to me gen1 marauder, in 25 caliber. It supposed to have a modified valve and heavier hammer spring. I'm wanting to use it exclusively for slugs, if possible. Are the barrels choked? And if so, will slugs shoot well? If a choked barrel is tighter, could I use...

2L8, could you tell me why you have the red band around the end of barrel, between the ports?

1555.00

Thank you sir.

Anyone know the oring size for the foster fitting fill port on a Benjamin marauder?

Would make a perfect nuisance control rifle.

2257.00

875.99