Wofys World's latest activity
Yup had same thing, special tool, #6 O'Ring ,Fireing valve seal 2 pieces- I just had kinda the same thing going on. On mine most of the air was leaking out the bottom of the receiver. O-ring #6 was bad. You can...
- Wofys World reacted to airgunfans's post in the thread How to fix regulator creep problem without buying a Huma ? with
Like. My Huben K1 ( version 2 ) has rather sever regulator creep and after reading many posts on this subject, I came to the understanding... - Wofys World reacted to Bandito's post in the thread Which mould for casting slugs for the Huben GK1 .25(3)? with Like. I was just curious. My thinking here, if any possible rough spots are polished they may not accumulate lead as fast as a non polished...
- Wofys World replied to the thread New Huben K1 and the regulator stability disaster.One issue I'd like to get some feedback on is that the secondary regulator is creeping up in pressure as though maybe an "O" ring is...
- Wofys World replied to the thread Which mould for casting slugs for the Huben GK1 .25(3)?.According to Greg K on YouTube, straight lead will leave deposits that will require much more frequent cleaning. As you probably know...
- Wofys World replied to the thread Which mould for casting slugs for the Huben GK1 .25(3)?.I have not done a hardness test, simply added lead to make it a 3 to 1 mix, 1 hardball to 3 lead to reduce the hardness. Seems to work...
- Wofys World replied to the thread Which mould for casting slugs for the Huben GK1 .25(3)?.Update: I cast slugs using 25% RO's hardball and 75% lead. Tested today and seems to work well in both the K1 and GK1 .25 caliber. Hits...
- Wofys World replied to the thread Which mould for casting slugs for the Huben GK1 .25(3)?.Update: I recast slugs using 25% RO's hardball and 75% pure lead. Tested today and seems to work well in both the K1 and GK1 .25...