WobblyHand's latest activity

Getting back to this, I used a 1/2 degree wedge. I put an extra set of holes in it so the wedge can either raise or lower an RMR sight...

The 50 MOA range is from the center, so that's approximately 25 up and 25 down. I believe the Holosuns have 1 MOA click adjustments. So...

I had this problem. One solution requires a very thin wedge. I printed one. It might have been either 1 degree or 1/2 degreeb(don't...

There's naught wrong with this one! Love the lines, weight, mechanism, arrangement. They really nailed it, like a little air gun...

@WobblyHand If I'm not mistaken, a Holosun 507c. It has what you're describing except the reticle is red.

I ordered that kit you posted, just to do this operation. Which Holosun did you get? I have a green one with a ring and a dot...

Late as well, but managed to pick up a 2240 back when Amazon marked them down to $45. It was shipped in a cardboard box, rather than a...

Loctite has an antivibration product. Cant remeber what it is but we used on a spring adjusting screw a liftime ago. Paint it on the...

found it. its on amazon called vc3 thread mate

Yes, I've seen blue (and white) teflon come off. Actually, with plumbing threads. Been warned about it by machinists using it next to...

Blue teflon tape has a nasty habit of having little bits break off and getting into things. I wouldn't use it in this application. A...

Just a caution. If you have astigmatism, a red dot can be a problem, as the dot is no longer a dot.

My circuit design skills are out of date, but to save power, I wouldn't expect them to try to do the actual time interval measurement in...

Kelly is fantastic AAA+++