WobblyHand's latest activity

I have been considering addressing some of these questions for a while. This week I have decided to answer questions I've encountered...

The wife wants to learn to shoot some of my PB's. She's never shot anything before so I figured one of the replica airguns would be a...

So what pistol did I Shoot today…I have been digging threw the cobwebs in the man cave…and found …”Rusty Joe”…my Phase one 1377...

I was able to make some elevation adjustments and a few windage clicks I got something I can work with. I’m a poor pistol shot, but this...

This may be overkill, but I photographed the steps I took to correct the issue. If you’ve never done this or have a brain fart, use this...

Oh, you are making me blush. ;) Don't be harsh on yourself. We've all messed up on these kinds of things. Like an idiot, I bought...

Nevermind, I went to the reddotmate website and looked up the adapter. You must have a gap between the bottom and the receiver. When...

My GK1 rear sight used a flat head screw. I simply reused it. Is the bottom of the hole tapered at 90 degrees, or flat bottomed? If...

My sight base is only attached by a single screw to the receiver, but it seems to be ok, if snug but not tight. We both know it is best...

From here, I can't determine it definitively. Need to measure the plates, the screw lengths, and the flatness of the receiver. These...

As you noticed, that isn't going to work well. Front of the sight is pointing to the sky! Need to fix that somehow. Maybe some sort...

@WobblyHand This is exactly what I did and it’s what I suspected was the root of the problem. Thanks for mentioning it. I’ll post pics...

I am using the factory screw. Things need to be locked in place, but not too tight. I noticed that tightening too much seems to lift...

Here's the picture of an RMR mount. It is asymmetric. I put four more holes in my shim so I could reverse it if necessary. Hope you...

It's kind of funny, the wedge isn't really visible when installed, It's 0.023" thick at the thickest point, and 0.010" thick at the...