Recent content by Why

  1. W

    Feedback WHY

    goud123 excellent seller packed well quick to ship thanks!
  2. W

    airmax, why so loud ?

    Or maybe if you have a Kaliburgun or Taipan othe roll pins that comes with them may fit you use a large screwdriver in between to torque it clockwise instead of the tools or maybe from some other Russian or Ukranean or Czech gun may have pins like this you can use.
  3. W

    airmax, why so loud ?

  4. W

    airmax, why so loud ?

    Do you have either these tools? If replacing the o-ring doesn't do it then this the worst case scenario you will need one of these. Degass the gun empty then tighten that valve face the silver round piece the hammer strikes the pin there are 4 holes you see them tighten clockwise but gun must be...
  5. W

    airmax, why so loud ?

    That breech O-ring around the barrel partially obstructed by that swing out gate carefully remove it then go to ACE Hardware and find a replacement in their faucet and plumbing section same size and another a little fatter just imagine you're going to put it inside the breech where you took the...
  6. W

    One more taipan veteran question

    Please DO report back when you a actually receive it on that day.
  7. W

    Air arms s510 hammer spring?

    For your slight bump up in power you want, that is the best I can offer. Shim that hammer spring.
  8. W

    Omega Air Charger Compressor

    Call AoA they were an authorized dealer for that brand and do check what the warranty is like.
  9. W

    altaros bullets

    That looks like a Hornady A-MAX!
  10. W

    Gamo Gen 2 Swarm Magnum. 22

    Squirrels, crows and rabbits don't require much every to kill them unless you think your gun has lost half its original powar and the lower power may aid in more humane kills believe it or not rather than complete pass throughs. Cocking effort should be less too if that gas piston leaked...
  11. W

    Gamo Gen 2 Swarm Magnum. 22

    Why don't you warranty your gun through Crosman? They have excellent warranty and if yours is already past its time then you could just easily replace that gas piston yourself by ordering a replacement from Crosman (if your gun is already outside of warranty). Save you some money in these hard...
  12. W

    Shorter or longer barrels for accuracy? .177,.20 or 22 better for accuracy?

    That 18" Lothar Walther barreled AF Talon sounds good enough to me for 25 meter bench rest. Set power level at around 860 to 880 feet per second regardless of what pellet weight you choose to shoot. Tends to be the typical sweet spot in velocity shooting Diablo (normal pellets with skirts) pellets.
  13. W

    Jumping into Benchrest, will a old Airforce Talon work?

    Buy a decent scope for it perhaps something with at least a 20x or higher. You can even get by with an Amazon $45.99 Pinty 6-24×50 no kidding this is a decent scope with a 15 yard focus or perhaps you already have something 20x or higher so no need to spend. If after this, you decide to go...
  14. W

    Jumping into Benchrest, will a old Airforce Talon work?

    That 177 should be just fine as-is since it has a Lothar Walther match grade barrel on it and you probably want to try the 13.4 grain JSB Monster or the Monster Redesigns. Surely ONE would work better. Maybe even the 10.34 grain JSB Heavy with the 4.52 head size. Or just use the pellets you...
  15. W

    Daystate AirWolf MCT barrel moving

    Use PLEDGE or NAPIER for best results.