Welldone's latest activity

You need to be able to see. Buy lamps. Many screwdrivers, Allen wrenches, pics to remove o’rings. You need a piece of white hairy...

I went with a Chapman set. Haven’t used it yet, but looks like good machining. There are some nice little touches to these tips.

Does anybody have any experience and tips on how this “mousetrap” goes back together. Oh, I WILL get it reassembled. I just want to see...

The more I think about this, the more I think @Sergey1972 is correct in that the issue is that your barrel has too much gap to the mag...

Very helpful!!!!!

That piece is there to help guide projectiles as the mag rotates towards the barrel. I expect that without it, jams would be more...

The long cap screws secure the barrel block to the action. The lower short cap screws are the ones that are used to align the barrel in...

Thanks for the tips. They are very helpful as I ease into setting up my K1. My barrel and barrel block have four bolts( 2 long and 2...

I have a 2021 K1 with a 2018 magazine (and matching LW barrel) in it, and there is no noticeable play in it like you are showing. I...

there’s also a flat half circle-like piece of black plastic(almost like a spacer)that sits between the magazine and the barrel block.

Tighten the barrel itself to remove the play and set proper gap magazine to barrel.

Can anybody measure the width of your mag? Is there play like I’m showing in my little video? With my gun completely assembled, the mag...

Both mags are identical width (11 MM)

Thank you so much for your comments. I have installed the barrel block assembly and the magazine acts the same way. Maybe not aligned...