Welldone's latest activity

Very helpful!!!!!

That piece is there to help guide projectiles as the mag rotates towards the barrel. I expect that without it, jams would be more...

The long cap screws secure the barrel block to the action. The lower short cap screws are the ones that are used to align the barrel in...

Thanks for the tips. They are very helpful as I ease into setting up my K1. My barrel and barrel block have four bolts( 2 long and 2...

I have a 2021 K1 with a 2018 magazine (and matching LW barrel) in it, and there is no noticeable play in it like you are showing. I...

there’s also a flat half circle-like piece of black plastic(almost like a spacer)that sits between the magazine and the barrel block.

Tighten the barrel itself to remove the play and set proper gap magazine to barrel.

Can anybody measure the width of your mag? Is there play like I’m showing in my little video? With my gun completely assembled, the mag...

Both mags are identical width (11 MM)

Thank you so much for your comments. I have installed the barrel block assembly and the magazine acts the same way. Maybe not aligned...

I bought a k1 here on AGN and II have a question about loose the mag is. I know that the ID of the mag is only hitting on the high...

Kinda funny to me……… it’s like learning a “ new” word and now EVERYBODY is saying it. This is definitely a first world problem. 2 bits...

Anything German…………WERA

Agree 100% about the bits. The accountants got involved with that decision looks like.

I only bought the "fat " to use on Scope mounting . Gracie brand are good products , i would trust them for the long haul . The bit...