Recent content by wdr2

  1. W

    FX FX Crown MKII Safety O-Ring

    Thanks, the safety works just fine without the o-ring. This is with a wood stock.
  2. W

    FX FX Crown MKII Safety O-Ring

    I took the stock off my FX Crown MKII last night for the 1st time following the instructions in the “FX Crown MKII Full Disassembly - FX Masterclass” Youtube video. In the video, he shows an o-ring on the safety which is not on my rifle. Should I have one and what type is it? I don’t see this...
  3. W

    JTS Dead Center Giveaway - Week 2

    IN
  4. W

    Airgun shooing app

    In the Apple App Store they have both Chairgun Elite Ballistic Tool and Chairgun Elite Ballistic Tool+ Any difference between the two?
  5. W

    Casting Ammo & Mix

    FYI - I cast all of my standard velocity handgun bullets (up to 1000fps, 32 to 475 caliber) out of wheel weight alloy with 2%tin added. One of the best resources for bullet casting is "From Ingot to Target: A Cast Bullet Guide for Handgunners" by Glen E. Fryxell and Robert L. Applegate...
  6. W

    HW/Weihrauch Which is your favorite front sight or insert?

    I prefer aperture inserts for bullseye target use and a post for silhouettes/plinking. levgen721 - that front sight looks very useful. Is that a Gehmann Model 520?
  7. W

    Yong Heng Pressure Gauge

    My link above was for the plug, an adapter is: https://www.fittings.space/gtm2p-02zf-m10x10mc
  8. W

    Yong Heng Pressure Gauge

    I used this one: https://www.fittings.space/gsm13-m10x10m-sc
  9. W

    Yong Heng Pressure Gauge

    I replaced mine with a plug. Generally, your fill gauge is higher quality and considerably more accurate.
  10. W

    Brass vs Aluminum mould

    I cast several thousand bullets a year and have perhaps a dozen each of aluminum and brass molds. NOE molds are well built and generally cast well. Another fine mold maker also in Utah is Accurate Molds. The Accurate website has some thoughts about mold materials. see...
  11. W

    Hello guys, This is Pete the pellet trap builder.

    I received my trap last month. Made very well by a fine welder. Works great (FX Crown 22 cal). Thanks!
  12. W

    Yong Heng compressors: which is the best one to get?

    If it helps, I bought mine here in Feb, works great, appears genuine best I can tell: https://www.ebay.com/itm/373668599389
  13. W

    FX Crown MkII Barrel Removal

    For an FX Crown MkII, is it necessary to loosen and/or remove the screw in the top of the receiver in the picatinny rail every time before removing the barrel? I have seen this called the blanking set screw. In some videos, this screw is removed and in others only the 4 screws on the side of the...
  14. W

    Walmart compressor

    Thanks much for the info, nice design
  15. W

    Walmart compressor

    Nice setup. Can you describe the cooling system? Using water? What is the radiator make and model?
See more
Top Bottom
Back
Home
Forums
Resources
Menu