Recent content by WastedWages

hello there the fac huma huntsman reg will work in the huntsman regal. Part number DAY04 Very easy to install you remove the cylinder from the block. Then remove the daystate o rings from block side of the air tube completely, install the reg, side with brass adjuster goes in first, then...

First trigger ever pulled was a BSA meteor bought in 1981. Maybe trigger was pulled in late 80's. First own bought airrifle was a gamo CFR whisper Second bought rifle was a Air Arms TX200 mk3 First PCP Air Arms S400 classic

Mr. Please share with us where you get this app. And do you feel strelok pro is the same calculation?

Hi all. I installed a alteros reg on my S400 classic. Its a 100-150 bar reg and was set at 125 on the scale out the box. I went down a bit to 115-120 before installing and installed exactly as per video and pressurized and it only went to 95 bar. With 150 in tank. I also installed the...

Me and the guy who made the vid... so there are 2 of us.... Thank you so much @ctshooter for all your help... Now me and the other chap out there can enjoy their keller guages.... Hallelujah

I heard its a FX barrel

From the beginning... thanks so much for answering mate. I have the manual, its just it does not seem to correspond to what the manual says. I cannot even get to the calibration page. I am baffled by what they say is a long press and a short press or single tap or whatever. I dont know at...

Sorry to be late... but really try to get a digital guage on the reg... you will see it gets higher as cylinder pressure goes up. This happened to me and i fixed it by doing what ERNEST ROWE suggests on the video where he polishes the plastic piston face.... the black plastic piston... it really...

Is this forum alive? Does anyone know how ro set the fx keller guage correctly please

Finally... some big names are discovering FT... hallelujah. ... Now try it with the uk rules... sub 12....🫡 I've been doing it since 2013

Does anyone know the procedure?

Super frustrating

Hi all. I have downloaded the manual, but i cannot get around the settings. I cannot figure it out. Please assist

How can i bring the fx reg pressure down to be happy at 60 bar or less?

Where is the best place to get FX help?