Recent content by Veerkracht

Michael, One might also calculate the tube for size. Often the manufacturer is optimistic about the total cc. of only the tank size. Shoot till the regulated pressure is reached, otherwise a big plenum wil give a different result then a smaller one. Reaching regulated presure is different than...

You'll be supriced what a normal quality .22 bsa barrel does with pellets AND slugs. However, just like any other brand, there are also bsa barrrels that are not that good. Just push a pellet thru, then you'll know. But even then, a bad bsa outshoots many others. Regards, Robert

Sniper, Get on a plane and go shooting. You will learn a lot. Regards, Robert.

My Taipan Veteran Std is good enough for me. http://www.100metercrew.nl/100metercrew.nl/index.php/uitslagen-2022 Shot with HN 21grn .217 at 273ms. Chart: https://postlmg.cc/tZ0wC8rD Last year: http://www.100metercrew.nl/100metercrew.nl/index.php/uitslagen-2021 It does the JSB 16grn about the...

I have been shooting hn 21 .217 the last 3 100 meter matches in my country. My bsa barreled taipan veteran standart shoots them at 275 ms, if maxed out at 120 bar huma reg it is 285 ms. Pretty good results the last contest: I got 1st in the unthetered class 2nd overal airrifle...

Thanks for sharing! I see a lot of time in testing and posting, thumbs up. Unfortunately those griffin slugs are not for sale in my country. H&N in al sizes are no problem. Do you have plans in testing them to? Regards, Robert.

MtnGhost, Do you have results on slugs with cz barrels without choke? Regards, Robert

mtnGhost, I fully agree on re crowning en re chambering the cz barrel. Just got in a 550mm barrel, had to space up the chamber to give the .217 21grn room to enter whithout damage from the probe. It is a tight fit, even for pellets. The crowning was kind of weird. a long choke and at the...

Motorhead, I also made the spring guide on the hst screw out of POM Lowered it in the guide it selfe, now the blocking screw is funtioning again. regards, Robert

Ok Thanks Jim

Is a plenum extension inter change able with the other side of the tube? That way you can increase the volume of the main tank. Regards, Robert.

As benching: it is a bullpub, it will do just fine if you praktice, but it build to be a truck gun. I do shoot 100 meter competition and with very good results. Both are build very well, solid guns. Due to that: they are both heavy. air consumption is neck to neck. The ed mechanism is a...

Experience with both in .22 The Taipan cz barrel (NOT the lw barrel) is a little bit better with pellets and slugs up to 25grn. The trigger is very good for bullpub type of gun. The power is adjustable without taking the gun apart, handy with changing from slugs to pellets vice versa. The...

Made a heavier hammer by drilling a hole 5,5 cm deep, 5mm wide in the hammer. Filled it with lead and made a peek tip for closure and to reduse sound. Also made a pom guide/seating for the spring. A stock hammer weights about 24 gram, this one 26. This realy reduced the sound. Do not...

Love it Motorhead! Lots of idea's Made a new valve Used an old experimental edgun valve with a 2mm Ti rod. Made a steel 3mm bushing to fit the Taipan Glued it al togetter, tomorrow testing time. mtnGhost did a lot of research on the valve, his topics and posts were very intresting...