Urban2212's latest activity
Urban2212 reacted to KatoKevin454's post in the thread Airgun Technologies Applying Heat Shrink Tubing to Outside of Barrel? with
Like. sound is not likely coming from the solid areas of the barrel, all the sound would be coming from the open ends of the barrel and the...- Urban2212 replied to the thread Airgun Technologies Applying Heat Shrink Tubing to Outside of Barrel?.I am unfamiliar with this can you elaborate?
- Urban2212 reacted to KatoKevin454's post in the thread Airgun Technologies Applying Heat Shrink Tubing to Outside of Barrel? with Like. I've used shrink tube on a air stripper and it worked well to silence the loud bark of a Walther 1250 Dominator PCP, but the Air...
- Urban2212 reacted to MikeVV's post in the thread Airgun Technologies Applying Heat Shrink Tubing to Outside of Barrel? with Like. I've "sorta"...done it. More to hide a weld, but yeah, I placed heat shrink tube over the shroud, but not the barrel. No change in...
- Urban2212 posted the thread Airgun Technologies Applying Heat Shrink Tubing to Outside of Barrel? in PCP Airguns.I have been thinking about noise reduction the noise from a Bara 250z I have ordered but not yet received. I realize I am getting aheadn...
- Barra 250z tunes I am offering tunes for the barra 250z. Full tune entails Rogue air trigger kit install Trigger sears polished...
- Urban2212 replied to the thread N/A Barra 250z received today.Wow!!!! That is ridiiculous! I'm curious about the condition of the gun. Did you imspect it closely as far as torn orings and/or loose...
- Not sure if the OP got his from Barra or if my experience is normal.. I ordered direct and it took them about 6 weeks to get mine out...
- Urban2212 replied to the thread N/A Barra 250z received today.Congrats, mine is on the way. Did you order it from Barra if so, how long did it take for delivery?
- Urban2212 replied to the thread N/A Barra 250z received today.Congrats, mine is on the way. Did you order it from Barra if so, how long did it take for delivery?
- So I got my barra 250z in .25 today and I’ve only shot about 3 mags and I’ll say one thing it’s pretty loud and I def need a moderator...
- Urban2212 replied to the thread N/A barra 250z bolt.You nailed that one. Thanks.
- If you remove the rear pic rail there is a silver adjustment screw underneath that houses a spring loaded ball bearing. Turning it...
- Urban2212 replied to the thread Barra 250z moderator.I emailed Donny FL about wanting a.moderator that matched the air tube on the 250z and they said it is 1.6" in diameter and recommended...
- Urban2212 reacted to dizzums's post in the thread Has Anyone Re-Wrapped a DonnyFL FX Moderator to make it Quieter? with Like. so far no .. other gun noise is where the barrier generally lies to getting my guns quieter .. most of the noise after putting a donny...