Trucker3573's latest activity
I don't think you needed to worry about the first reg. its the 2nd reg that matters.- Check for debris in there. It operates like a poppet valve. I recently had a leaker.
- Trucker3573 replied to the thread FX FX Leopard liner swap from heavy liner to standard pellet liner .30cal.You should be money with that liner. I have had excellent luck in 3 different 30 cal fx guns with the pellet liners.
- Trucker3573 reacted to twalt12's post in the thread FX FX Leopard liner swap from heavy liner to standard pellet liner .30cal with
Like. I have tried JSB 44.75 they are 2nd best shooting 1.5" -2" groups at 55 yards, Hades shoot the best but has to be around 850FPS 1-1.50"... - Trucker3573 reacted to twalt12's post in the thread FX FX Leopard liner swap from heavy liner to standard pellet liner .30cal with Like. end cap with holes for small needle nose pliers or snap ring style pliers. It came off easily with gun degassed picture of end cap...
- Trucker3573 replied to the thread Barrels Maverick/ Wildcat mk3 600 mm .30 barrel kit..This listing has been renewed
- Trucker3573 replied to the thread PCP Rifle FX Wildcat MK3 BT 600 mm in both .25 and .30 Reduced !.This listing has been renewed
- Trucker3573 reacted to Azn8gram's post in the thread Daystate Alpha Wolf won’t shoot after cleaning. with Like. I got it figured out! I noticed some metal shavings around the firing pin/hammer. Took the whole thing apart. I believe it was pieces of...
- I wonder if this is what inspired that topic by Bigragu. I figured something lit his fuse, I just didn’t go look for it until I saw the...
- Trucker3573 replied to the thread FX FX Leopard liner swap from heavy liner to standard pellet liner .30cal.Probably be a good idea to call utah about the liner swap. I would assume the leopard is similar to the dynamic platform where the end...
- Trucker3573 replied to the thread Daystate Blackwolf information.Love the shooting room and its setup 👍
- zeroed at 40 yards easily with same hole
- Trucker3573 replied to the thread Daystate Alpha Wolf won’t shoot after cleaning..I think you will be fine just resetting as long as no pellets are jammed in the barrel. There may be a cover over the gauge that will...
- Trucker3573 replied to the thread Daystate Alpha Wolf won’t shoot after cleaning..It’s the easiest way. All you need is an adjustable crescent wrench to loosen it. Just enough to make it start leaking. Super simple...
- Trucker3573 replied to the thread Daystate Alpha Wolf won’t shoot after cleaning..Just as a comparison I have my .30 cal at 150 bar and it will easily push 44.75 over 900 fps. If you only want 850 you will probably be...