Trucker3573's latest activity

5.25 on the hammer screw is really high. 6mm is max hammer pre load. I would turn it in all the way clockwise and work up.

This seems contrary to the results posted at the link I referred to, but none of the conditions under which they operated are listed...

JB Tanks normally use a "Slow-Fill" valve. You still wanna crack it open slowly and not open it much. It will barely move the needle...

Fill slowly, bleed quickly, PAY ATTENTION as you reach desired pressure. YOU are the "system" to keep from overfilling.

For myself,3300-3400 psi is plenty, AEA 357 big bore 150gr 940 fps and Texan .308 150gr 990 fps. long distance woodchucks, racoons and...

I remember watching or reading somewhere that filtering the input side is very ineffective. The air basically just rapidly passes...

Good advice above, I would only add the Hammer Spring FX uses two different sizes. You need the shorter 52mm spring and a 13g weight for...

Correct but is the digital gauge left on the gun all the time ? I bet if it is and you check after it sits the pressure in the plenum...

Or: https://nordicmarksman.com/anschutz-9015-one-3p-universal-gripm/

Does sound like a reg pressure increase. I can only speak from my experience. I have never owned an amp reg that didn’t creep about 5...

I have heard of this happening if the internal hammer spring adjustment screw is turned out counter clockwise too far. You reach a...

That is really strange if everything is legal in both places. Have you checked if they would allow it if shipped to an FFL licensed...

Let’s not forget that daystate pricing makes no sense anyway. The ghost is an example. Short barrel vs hp …same price but the shorter...

It's almost as if airgun shooters are actual people with individual preferences and budgets. Crazy. But seriously, it feels like this...

I agree Trucker.... the concept of diminishing returns applies to most things, and certainly to airguns. What makes diminishing returns...