trompis's latest activity

it is beyond that sir. they sell used airguns as new, they swap parts like regulators, at once they got mk1 impacts that didn't sell...

yeap whenever you point something at AGT, their answer is that you are the one to blame or they throw a silly excuse just to get on with...

99,9% of every kind of mystery boxes contain products that are not selling and they need to get rid of them, unless you are a...

3,5x1,5 nbr70 but i would upgrade to nbr90

I currently use MERO and have compared it directly with Strelok Pro. They come out identical when all of the stats are the same...

the average LW is 1:17,7 and their polygon barrels are not well known slug shooters

orings around the barrel are gone, try some nbr90 ,the machining in there is a bit rough on all of their models, so my best guess they...

it will cost less to part exchange it with what you want, a bottle will cost 350, plenum ,bottle adapter , 2 regulators another 400+ ...

i contacted them as well when i had the P3 about the regulator, i asked them why does my p3 have a number 6 regulator housing. the...

if air is coming through the hose. then the foster fitting(part that attaches to the gun) is not tight, remove it and put 2-3 layers of...

if the plenum emptied when you removed the bottle: your bottle pressure was lower than your regulators set pressure, now if you dry...

does your regulator gauge show any pressure, it sounds like there is no air in the plenum

now on your impact you have a 52mm long hammer spring. change it to a 56mm(part number 11500) and you are good to go.

the list on the thread is mostly not for The HM1000,i had to wait 1 month for them to arrive from ebay and then dissasembled the gun to...

for a 700mm liner, the carbon sleeve is 600mm in length it needs to be shorter for the liner lock and the rear brass part to be able to...