Tricky-Dicky's latest activity

Yes, the number has the Duro first, the last number/s are for the numbered O-Ring system, not metric (SAE). So, the example provided by...

i think i may need to replace some :unsure:

Not 8mm. It’s a 3/16ID x 1/16CS.

Go to the Skout website-Click on "Support" -then Click on "Diagrams" all the parts are listed they have the numbers 7011 or 9008 ..the...

They don't list the O rings in the Epoch manual, and it's limited to the regs in the Evo manual, I thought I had seen a full list of non...

I seem to remember seeing a post where someone had made a list of the O ring sizes and some equivalents, but I am dammed if I can find...

I think you would do far better if you try and increase the velocity to around the 8-900fps mark with that weight of projectile, so...

Too many variables to say yes or no to reg pressure, apart from hammer strike the plenum volume will be critical to achieving the...

Thank you very much for the video I will watch it when I get time. I wonder why they’re running the way they do. The way I got it it’s...

Cant see any problem with that in fact there is less stress with no air in the system it will just open the valve a bit further and...

No, as the hammer has the main spring for the outer part of the hammer which supplies the firing force and then the free floating inner...

You do realise that what you're seeing in that video is the external part of the hammer which will bounce as when fired it comes to a...

My understanding is that as long as there is enough pressure to unbalance the valve all is good, which is the reason why the LP is...

I’m far from an expert but I have been spending considerable time with my gun. Looking at your reg numbers, you are done playing with...

LOL! I have £500 guns that will put my £3000 guns to shame, go figure, In fact I have had more problems with new expensive guns than I...